Logistics · Transportation

Custom TMS software built around your network.

Custom TMS software development starts where the off-the-shelf systems stop fitting. Our founder built the transportation side of a cross-border logistics backend from scratch: carrier selection on every parcel, consolidation for line haul, manifests, and tracking across every leg. We build the parts your network needs, around the carriers and systems you already run on.

30 minutes. A written gap map. No pitch unless you ask for one.

Routing · line haul
built by our founder
✓ One status
across every leg
An illustrative shipment, not a client’s screen. Our founder built the system this page describes for a logistics company we don’t name.

01 · What goes wrong

The system you bought models someone else’s network.

What operators tell us about their transportation software. Each one is a spreadsheet that should not exist.

  1. The TMS assumes a network you don’t run.

    It expects truckloads when you move parcels, or one country when you cross a border, and the gap between the two is filled with spreadsheets.

    Misfit
  2. Carrier choice lives in people’s heads.

    Which carrier takes which lane is something a few people know, so the same parcel is routed two ways on two shifts.

    Unwritten
  3. Line haul is planned at the dock.

    What goes by air and what goes by ground is decided on the day, and nobody can say afterward why.

    Unplanned
  4. Tracking stops at the hand-off.

    Each carrier reports in its own way, so a shipment that changes hands twice has three statuses and no single answer.

    Fragmented
  5. Every exception is a cancellation.

    A bad address or a wrong weight means voiding the shipment and starting again, because the system has no way to correct it and re-rate.

    Rigid

02 · What we build

Transportation software, from carrier selection to the delivery scan.

Each part is built to the carriers and systems your network already runs on. The gap map scopes which ones you need.

  • 01Carriers

    Carrier selection on every shipment

    Each parcel goes to the lowest-cost carrier allowed to deliver it at the service level it needs, with surcharges counted and your clients’ own rules respected.

    Carrier rate shopping software
  • 02Zones

    Zones and rate cards

    Destinations resolve to delivery zones from the postal code, and each carrier’s rate card, surcharges and weight rounding are applied the way that carrier bills.

  • 03Consolidation

    Consolidation for line haul

    Parcels are grouped by destination and by whether they need customs clearance, into consolidations that travel by ground line haul or skip zones by air.

  • 04Containers

    Containers scanned as one

    Pallets and pallet boxes carry their own barcodes, so one scan at a hand-off updates every parcel inside.

  • 05Manifests

    Carrier manifests, confirmed

    Parcels are transmitted, the carrier confirms a manifest and the document comes back, paced at peak volume so the carrier’s API does not time out.

  • 06Tracking

    One status across every leg

    The house tracking number, the network partner’s and the final-mile carrier’s resolve to one shipment, with carrier events on one timeline that your customers and your support team both see.

  • 07Exceptions

    Corrected and re-rated, not cancelled

    Staff fix an address, a weight or a unit, re-run carrier selection and move the shipment to another carrier, without voiding the order.

  • 08Dispatch

    Dispatch and driver apps

    Stops in order on the driver’s phone, live location back to a dispatch console, and delivery status written to the order. iOS and Android through managed pipelines.

    Mobile app development
  • 09Reporting

    Simulation and reporting

    What-if runs on any origin, destination, size and weight, a record of how each live shipment was routed and priced, and performance and transit-time reports your clients export themselves.

No carrier or vendor is named here, on purpose. We build each part to the carriers and systems your network already runs on.

03 · Proof you can check

The transportation side of a backend built from scratch, and delivery software in a client’s own words.

Our founder built the transportation side of a cross-border logistics backend from scratch; we don’t name the company or publish its counts. Below it: delivery software in a client’s own words, and real-time tracking we took over from another vendor.

Also on the books

Boat-trip marketplace · MyBoat2

Taking over a two-sided boat-trip marketplace

We inherited another vendor’s codebase for a boat-trip marketplace: captain verification and earnings, real-time trip tracking over Socket.io, Stripe trip payments, and an operations console for trips, captains, passengers and piers.

  • Codebase takeover
  • Marketplace
  • Real-time tracking
  • Stripe
  • Google Maps
Client
  • Our founder built the transportation side of a cross-border logistics backend from scratch: carrier selection and rate shopping, consolidation for ground and air line haul, barcoded containers, staged carrier manifests, tracking across every leg and a tool to correct and re-rate exceptions.
  • ClientRaley'sIn its own words below: the logistics software we developed improved its delivery operations, with better route optimization and an interface its drivers appreciate.
  • ClientMyBoat2Real-time trip tracking over Socket.io and an operations console for trips, captains, passengers and piers, in a codebase we inherited from another vendor.

04 · In their words

Clients on the work, word for word.

Names and titles attached. When someone also has a business tie to our founder, it is disclosed under the quote.

  • The logistics software Synaptech developed has improved our delivery operations. We’ve seen better route optimization and our drivers appreciate the user-friendly interface. Solid technical team to work with.

    Zac WilsonLinkedInDirector of Digital Commerce · Raley’s

05 · How it starts

Carriers and rates first. Then line haul. Then tracking.

Each step lands on the one before it, and the new parts run beside the system you have until their results match.

Every line of code we ship runs on one rule: AI drafts, senior engineers decide. How we build →

  1. Step 1: The free Production Gap Review

    Bring your carriers, your lanes and the system you run today. We walk through how a shipment moves and hand you a written gap map: carrier selection, consolidation, manifests, tracking and the exceptions nobody has a tool for.

    Out a written gap map, yours to keep

  2. Step 2: A written plan

    If there is a fit, you get a written plan: what we keep, what we build, and why, with the scope, a timeline and an estimate. If buying a product is the better answer, we say so.

    Out written plan + estimate

  3. Step 3: Carriers and rates

    Your carriers’ zones, rate cards and surcharges loaded and checked against real invoices, and carrier selection run in simulation before it routes a live parcel.

    Out rates that match the invoice

  4. Step 4: Consolidation and manifests

    Consolidations for ground and air line haul, containers with barcodes, and manifests confirmed with each carrier in staging.

    Out manifest confirmed before departure

  5. Step 5: Tracking and exceptions, one lane at a time

    Carrier events on one timeline and the tool to correct and re-rate. One lane switches over under watch, with a way back, and the others follow.

    Out first lane live, monitored

06 · Straight answers

Questions operators ask before they build a TMS.

Is this a full TMS?

It is the parts of one that your network needs, built to fit. What our founder built covers carrier selection, consolidation, line haul by ground and air, manifests, tracking and exception handling, for a parcel network that crosses a border. We build those parts, or the ones you are missing, around the systems you keep.

Do you handle truckload and LTL freight, and bills of lading?

What our founder built moves parcels: it consolidates them for line haul and manifests them with the carrier, and it does not issue bills of lading. If you run truckload or LTL freight, the review says plainly which parts carry over and which would be new work.

Should we build a custom TMS or buy one?

Buy when a product fits how you operate. Build when the gap between the product and your network is being filled by spreadsheets and people, or when your routing rules are the business.

The review is where we tell you which side you are on, and we will say so if buying is the answer.

Can it connect to the warehouse system and carriers we already use?

Yes. Orders, inventory and shipment confirmations move by webhook, and carriers are reached through their own APIs or a shipping platform. Those connections are described on the 3PL integration page.

How do you move us off the system we have?

One lane at a time. The new parts run beside the old system, reading first, until their results match. Then one lane switches over under watch, with a way back, and the others follow.

07 · The front door

Find out which parts of a TMS your network actually needs.

Bring your carriers, your lanes and the system you run today. Leave with a written gap map, before you spend a dollar. If we’re not the right team to close the gaps, the map is still yours.

30 minutes. A written gap map. No pitch unless you ask for one.

info@synaptech.io Send us a message Pleasanton, CA

Start with the gap map

The live site, your repo, or a share link from an AI app builder. Private? Write “private” and we’ll ask for access.
For a reply by text, add a US mobile number and tick the box below.

Your answers prime the review agenda. We use them to reply, and to text you only if you tick the box. Privacy policy

Free Production Gap ReviewBook a call